video
Manual Telescopic Mast

Manual Telescopic Mast

The system adopts screw drive or wire rope drive, which has good self-locking performance and can achieve reliable self-locking at any height, improving safety and reliability.

Chat Now
Product Introduction
 
Introduction:

 

1: The electric lifting rod is a lifting device designed specifically for various environmental conditions, which can be used for vehicle mobility or fixed on the ground. Its pole body is made of high-strength aluminum alloy, with two lifting modes: electric and manual. Its unique working principle, mechanical transmission form, and innovative structural design make it more directional, faster lifting speed, smaller external dimensions, larger working load, and stronger safety compared to other similar lifting poles.
2: Working principle: The system adopts screw drive or wire rope drive, which has good self-locking performance and can achieve reliable self-locking at any height, improving safety and reliability. The electric lifting rod mainly consists of a motor, reducer, gears, screw, lifting control switch, limit switch, and handle. The lifting rod is precisely installed and rotates freely with the rod body through the screw, nut, and seat sleeve inside the lifting rod, forming a threaded motion. The spiral rotation motion of the nut and seat sleeve is transformed into linear motion of the rod body, thereby achieving the lifting and lowering of the lifting rod.
3: Installation and usage instructions for lifting rods:
1. Vertical use: The lifting rod can be installed on the ground or on vehicles. No matter where it is installed, ensure that the lifting rod is kept perpendicular to the ground during use. If the lifting rod tilts, it will affect the effect of lifting and lowering the lifting rod; If the lifting rod tilts severely or tilts for a long time, it can also cause damage and danger to the lifting rod.
2. Cable fixation: The lifting rod needs to be installed on a fixed object and cannot be shaken, such as walls, carriage bodies, foundation piles, etc. There should be at least two fixed points for installation, one of which is on the lifting rod body, and the distance between the two points should be greater than 2/3 of the height of the lifting rod. The connection should be firm and reliable.
4:Usage:
1. Fixed method: Install the lifting rod on the top or around the equipment, and vertically lift the lighting equipment, camera equipment, antenna equipment, etc. to a high altitude to achieve the customer's predetermined function of the lifting equipment.
2. Mobile mode: achieved by reinforcing the tripod at the bottom, mobile lifting, and operation can be achieved by opening the tripod chassis and manually or automatically lifting the boom.
3. Car usage: The lifting rod is fixed by opening holes on the roof or installed around the car, and is jointly fixed by a towing plate and a support frame.

 

Hot Tags: manual telescopic mast, China manual telescopic mast manufacturers, suppliers, factory, telescopic display masts, portable masts, agricultural masts, Lighting tower for mining, radio telescopic masts, Light coverage radius

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag