If you're running a business that deals with putting up masts-whether for antennas, light towers, or whatever else-you know a winch is non-negotiable for getting that job done right. I've been supplying winches for mast winching for 8 years now, and one question I get more than any other is: "What storage requirements do I even need for this stuff?" A lot of new operators or small outfitters will just set a winch in a corner of the garage or load it straight into a work truck at the end of the day, and that's how you end up with a winch that seizes up mid-job or rusts so bad it can't lift a mast half its rated capacity.
Today we're breaking down exactly what you need to keep your mast winch working like it should, for years, without dropping extra cash on repairs or replacements. Let's get into it.
First off, the main thing I always remind people: winches don't care if you're dealing with a 20ft manual telescoping mast or a 60ft portable light tower-their storage needs are pretty consistent, but they do shift a tiny bit based on what you're pairing the winch with. You might be using a winch for a Telescoping Mast for Antenna that goes up once a month for a remote communications job, or a heavy-duty version that's pulling a Portable Light Tower every weekend for events, but the core rules still apply.
First, let's talk about the basics: location. You can't store a mast winch outside, full stop. Even if it's sitting in a covered truck bed or a shed with a leaky roof, exposure to rain, snow, dew, or even just harsh sunlight is a death sentence for the metal parts. I've seen guys leave a winch attached to a mast overnight in a field and come back to it caked in rust-no amount of WD-40 fixes that. If you don't have a dedicated indoor space, a climate-controlled storage unit is worth the $50-$75 a month. It keeps humidity low, so no moisture eating away at the gears or cable, and no extreme temperatures warping the metal.
Wait, humidity is a big one most people overlook. In damp climates, even a garage can get 50-60% humidity in the summer, and that's enough to start corrosion on steel winch cables and internal gears. If you have to store it in a non-climate space, invest in a cheap dehumidifier for that area-even a small one that runs 24/7 will bring humidity down to 30-40%, which is the sweet spot for metal tools. For the record, that sweet spot isn't just random; corrosion rates drop drastically when relative humidity is under 45% for steel parts. I've tested this with dozens of winches over the years, so this isn't just guesswork.
Next, how you position the winch when storing it. Most of the time, winches come with a mounting bracket, right? If you've been using it on a truck or a mast, don't just leave it mounted horizontally. Hang it vertically, if you can, so the cable is loose and not coiled tight around the drum. Wait-coiling a winch cable tight when it's stored is another mistake. When the cable stays wound up for weeks or months, it sets a memory. So when you go to use it again, it'll kink or twist, which makes it weaker and prone to snapping when you're lifting a heavy mast, like a Manual Telescoping Mast with all the antenna gear on top. Instead, after every use, unwind the cable 3-4 full turns, loosen the tension, and either lay the winch on its side on a soft surface or hang it by the mounting holes so it's vertical. That takes tension off the cable drum and keeps the cable from warping.
Also, don't set the winch directly on concrete. Concrete absorbs moisture, and over time, that moisture can seep into the winch's base, cause rust on the bottom housing, and even get into the internal gears. I always tell people to put a rubber mat, a piece of plywood, or even old cardboard down if they're setting it on the floor. It's a 2-minute step that saves you from a $200 winch because of bottom rust.
Now, if you're dealing with portable winches-like the ones used for smaller Push Up Antenna Mast setups that you carry around to job sites-their storage needs are a little different. You can't just throw them in the back of a work truck with shovels, bolts, and other tools, because they'll get banged up. Even a small dent in the winch housing can mess up the gear alignment, which makes it hard to crank or causes it to slip when you're lifting. Get a soft tool bag or a hard-shell case made specifically for winches. They're not that expensive, and they keep the housing from getting scratched or dented, plus they have pockets for small parts like the crank handle or cable clips so you don't lose them mid-job.
Speaking of parts, if you're storing a winch for more than a couple months-like if you only use it for seasonal events, say-you need to do a quick prep step before putting it away. Clean every part: the cable, the gears, the housing, even the crank. Use a mild degreaser to get rid of dirt, sap, mud, or any grime from the job. Then, dry it completely with a towel or a shop vac on low. Next, spray the cable and the internal gears with a light anti-corrosion lubricant-don't use heavy grease, that will attract dust and dirt over time. A dry Teflon spray is perfect, because it lubricates without gunking up. And if it's a manual winch, turn the crank a few times after lubricating to make sure the lube gets all the way into the gear teeth, not just on the surface.
Wait, another thing: temperature extremes. If you're in a place that gets super hot in the summer or freezing in the winter, that affects storage too. In heat, plastic parts on the winch housing can warp, and lubricants can thin out, which makes them less effective. In cold, lubricants can thicken, so when you go to use the winch, it's stiff and hard to crank. That's why climate-controlled storage is such a big deal for people in places with harsh weather. I had a customer last year in Minnesota who stored his winch in an unheated shed, and when he went to use it in April, the gears were so stiff he couldn't turn the crank. We had to take it apart, clean out the old frozen grease, and re-lubricate it-cost him an extra day of work and a hundred bucks in parts. He switched to a storage unit after that, no more problems.
Now, let's talk about storage for winches paired with aluminum telescoping masts. Wait, you might be asking: "Wait, the mast is aluminum, does that change the winch storage?" Yeah, a little. Aluminum masts are lighter, so the winch doesn't have to be as heavy-duty, but if you're storing the winch and the mast together, don't put them in the same bag or bin if possible. The aluminum mast can scratch the winch housing, and if there's any moisture on the mast when you put it away, it can transfer to the winch and cause rust. Store the aluminum telescoping pole in a separate, soft bag, and only bring it out when you're ready to use it. That goes for the Aluminum Telescopic Pole you might use for a light tower too-aluminum is lightweight, but it's soft, so it scratches easily, which can lead to dents that make it hard to extend later.
What about when you're storing a winch long-term, like if you don't use it for 6 months or more? There's a few extra steps. First, disconnect the cable from the mast or the load. Don't leave the cable under tension for months on end-even if the winch is rated for it. Constant tension stretches the cable, weakens it, and puts stress on the winch gears. After disconnecting, wrap the cable loosely around the drum, but don't coil it tight. Then, put a small piece of cardboard or a plastic bag over the cable's end to keep dust out, and make sure the winch is off the ground, like I mentioned before. Also, if it's an electric winch, disconnect the battery before storing it-batteries leak acid, and that can eat away at the winch housing. I've seen a battery leak eat through half a winch's frame because someone left it connected over the winter, so that's a must.
A lot of people also ask: "Can I store a winch on its side?" The short answer is, not if it has internal gears that need lubrication. If it's a small, lightweight winch without a big gear box, it might be okay for a short time, but long-term, storing it on its side can cause the lubricant in the gear box to settle in one spot, leaving other parts dry. That's when you get sticky gears and stiff cranks. Always store winches upright or hanging vertically, so the lubricant stays evenly distributed.
Let me also address a common myth: "Wrapping the winch in a tarp is enough for storage." No, it's not. Tarps trap moisture inside, even if you think they're waterproof. If you put a wet winch under a tarp, the moisture can't escape, and you get even more rust than if you left it in the open. Tarps are only good for covering a winch that's already clean and dry, and even then, only if it's temporary-like if you're moving it from the job site to your shop. For long-term storage, skip the tarp and use a climate-controlled space, or at least a space with good airflow so any moisture can evaporate.
Now, if you're just getting started with mast winching, or you're replacing an old winch, keep these storage tips in mind when you're setting up your work area. A good winch costs anywhere from $150 to $1,000, depending on the size and load capacity-you don't want to ruin it because you didn't store it right. I've had customers come back to me years later saying their first winch is still working perfectly, just because they followed basic storage steps.
At the end of the day, the biggest thing to remember is that storing a mast winch isn't rocket science. It's just about keeping it dry, temperature-stable, out of direct tension, and off the concrete. If you pair that with a quick clean and lubrication after every use, your winch will last twice as long, and you'll avoid the hassle of a broken winch mid-job.
If you're in the market for a new winch to pair with your telescoping mast, light tower, or push-up antenna mast, we've got a range of options to fit every need. Whether you're working with a small manual setup or a heavy-duty light tower, we can help you pick the right winch that works for your storage space and job requirements. Reach out to our team to discuss your exact needs, and we'll get you set up with a winch that lasts.






